Back to news

August 5, 2021 | Local, Clean technologies, Big data and Artifical Intelligence, Advanced manufacturing 4.0, Autonomous systems (Drones / E-VTOL), Virtual design and testing, Additive manufacturing

StartAéro 360 | Brève de l'actualité du 02 août

Brèvesde l'industrie aérospatiale –

2août2021

ADS Group/Commercial aircraft orders and deliveries, first half of 2021(26 juillet) Aircraft orders and deliveries in the first half of 2021 showed a mixed picture. Total orders were placed for 764 aircraft, 292 of them in June.However, most of those placed in June were simply changes in aircraft type. 453 aircraft were delivered, down from more than 600 in2019. The order backlog increased modestly to 12,866 aircraft. Single-aisle aircraft accountedfor 88 per cent of orders as domestic travel continuesto drive the slow traffic recovery. Industrie Aérospatiale

Airbus (29 juillet) Airbus a enregistréun bénéfice net de 2,2 milliards d'euros au premier semestre à la faveur d'importantes livraisons d'avions comparées à l'an passé, ce qui conduit l'avionneur à revoir nettement à la hausse ses prévisions pour l'année.Airbus a livré 297 appareils entre janvier et juin (196 même période en 2020). Le chiffre d'affaires s'établità 24,6 milliards d'euros(+30%).Airbus prévoit de livrer 600 avions en 2021 ; le carnet de commandes au 30 juin est de6925 avions dont 5666 de la famille A320.

Safran (29 juillet)Le groupe Safran a enregistré un bénéfice net de 674 millions d'euros sur les six premiers mois de l'année. Son chiffre d'affaires s'est établi à 6,9 milliards d'euros, en baisse de 21,6% par rapport au premier semestre 2020. Safran considère que les cycles de vols du moteur LEAP équipant les Airbus A320neo et Boeing 737 MAX étaient revenus mi-juillet à leur niveau de 2019 alors qu'ils n'étaient qu'à 56% fin avril. De plus, l'utilisation des moteurs CFM56 progresse également mais reste en retrait de 35% parrapport à 2019. Au final, Safran table sur une « accélération significative de l'activité au second semestre ».

Safran Cabin (29 juillet) Safran Cabin reportsa significant increase in both sales and orders. This compares with a very depressed first half of 2021 in which revenues declined by almost 40%, to €646 million versus the same period in 2020, itself impacted by the pandemic and the Boeing 737 MAX grounding.

BoeingB737 MAX(28juillet)Boeing has delivered more than 130 MAXs since Decemberand airlines have returned more than 190 to service. Boeing is currently producing 737sat a rate of approximately 16 per month and expectsto increase this to 31 per month byearly 2022.

Boeing financials (28 juillet)Boeing announced a $567 million profit in the second quarter of 2021, its first quarterly profit since the second half of 2019. However, the commercial aircraft business lost $472 million, although an improvementon a loss of $2.8 billion a year earlier. This was on revenues of $6 billion, up from $1.6 billion in the same period of 2020. Boeing as a whole generated $17 billion in revenue during the second quarter, up 44% from $11.8 billion in the same period of 2020.

Airbus A350 freighter (28 juillet)The Airbus Board of Directors has approved the launch of an A350 freighter derivative. It will be a “light hybrid” of current models but based predominantly on the A350-1000. Its maximum payload will be more than 90 metric tons and service entry is planned for 2025. Airbus says that it is “getting “closer every day” to securing launch customers.

General Dynamics aerospace results (28 juillet)Revenues of General Dynamics' aerospace businesses in the first half of 2021 were 18% down from 2020, to $1.6 billion. However, the $195 million profit was 23% more than in 2020. Gulfstream delivered 21 aircraft including 18 large-cabin and three mid-cabin during the three months ended 30 June, down from 32 in 2020. However orders have been strong and Gulfstream expects to deliver 32 aircraft in the third quarter and 37 in the fourth.General Dynamics characterized the G700 certification program as “difficult”. “Much remains to be accomplished, particularly concerning thecertification of the Rolls-Royce (Pearl 700) engine”.

Britten-Norman (28 juillet)Britten-Norman has acquired a fleet of BN2T-4S Islander aircraft which hadpreviously served in the UK militaryunder the designation Defender 4000 (D4K).The aircraft, which are the higher capacity, longer endurance version of the turboprop Islander, will undergo major refurbishment and be returnedto the civil aircraft register for export sale.

GE Aviation (27 juillet)GE Aviation took orders for 555 commercial engines in the second quarter, up from 74 in the same period last year. This included 438 CFM International Leap-family engines, up from just 24 in the same period of 2020. The company delivered 383 new commercial aviation engines in the second quarter, including 211 Leaps versus 362 and 178 respectively in 2020. GE Aviation expects a year-on-year production rate increase in the third quarter, but has not disclosed expected future rates, saying it is “assessing rate readiness across [the] supply chain”.

Drones-Advanced

Air Mobility Samad Aerospace (27 juillet)Cranfield based Samad Aerospace has completed hover tests for its second prototype eVTOL eStarling aircraft. Designed for intercity transport, the eStarling aircraft will combine VTOL capability with the speed and range of a business jet. With a semi blended wing body (BWB) design and powered by sustainable aviation fuel (SAF), the eStarling will be the fastest (300 mph) hybrid electric eVTOLaircraft in the world with the longest range(800 miles).

Joby Aero(27juillet)The full-sized, electric-powered prototype of the eVTOL developed byJoby Aerohasflown 150 nm on a single charge. The missionwas flown near the Joby Electric Flight Base at Big Sur, CA.

Spatial

Inmarsat (29 juillet)Inmarsat has announced plans for “ORCHESTRA”, a communications network that will combine existing geosynchronous (GEO) satellites with low earth orbit satellites (LEO) and terrestrial 5G into an integrated, high-performance solution. The initialfive-yearinvestment isexpected to be in the order of $100m. Future plans include a LEO constellation of 150-175 satellites.

Composite launcher fuel tanks (28 juillet)Under ESA's Future Launchers Preparatory Program,MT Aerospace has demonstrated a novel design of a small-scale tank made of a carbon-fiber reinforced plastic (CFRP) that is both leak-proof with liquid hydrogenand compatible with liquid oxygen, without the use of a metal liner. A CFRP tank is much lighter than metal, requires fewer parts and is faster and cheaperto manufacture. Traditionally,storage of cryogenic propellants requires tanks with metallic liners to make them leak-proof, with or without a composite overwrap.

Canadarm3 program (27 juillet)The government of Canada has awarded MDA a $35.3 million contract covering the preliminary and detailed design of the robotic interfaces (Phases B and C), of the GERI (Gateway External Robotics Interfaces) project. MDA has completed Phase A, the system definition phase.

NASA(25juillet)La NASA vient d'attribuer à SpaceX un contrat de 178 millions de dollars pour une mission vers Europa, l'une des lunes de Jupiter, avec le lanceur Falcon Heavy. SpaceX profite notamment des retards et des dépassements de coûts du lanceur super-lourd de la NASA, le SLS, développé par Boeing, Lockheed Martin et Northrop Grumman. Le décollage est prévu en octobre 2024.

Ariane Group (23 juillet)L'agence spatiale européenne a choisi Ariane Group comme maître d'œuvre d'Astris, l'étage additionnel pour Ariane 6. Propulsé par le moteur ré-allumable Berta à ergols stockables de très haute performance, ce « kick stage » doit effectuer sa première mission en 2024. Astris sera développé en Allemagne pour un montant de 90 millions d'euros.

InnovationITPS (29 juillet)

The International Test Pilots School (ITPS) of London, ON is offering course materialsvia distance learning. Practical demonstrations are delivered using the cloud-based NeoVuplatform to provide 360 ̊ immersive videos of flight test technique demonstrations. Viewable with VR headsets or other displays, the videos feature demonstration sorties flown by ITPS instructors

.Universal Hydrogen (28 juillet)Universal Hydrogen has signed LOIs with Icelandair Group, Air Nostrum and Ravn Alaska to retrofit 15 ATR 72 and De Havilland Canada Dash 8 regional turboprops with hydrogen fuel-cell propulsion systems. The LOIs encompass replacement of the existing P&WC turboprops and fuel tanks with a pair of two-megawatt (MW) Magnix electric motors, and a fuel cell compatible with Universal Hydrogen's modular hydrogen fuel storage tanks.

United Engine Corporation (27 juillet)La Russie lance son programme de R&D sur l'hydrogène et c'est le motoriste United Engine Corporation qui a été désigné pour mener les travaux. « Nous envisageons deux technologies de base : la combustion directe de l'hydrogène en tant que carburant dans desturboréacteurs modifiés et la transformation électrochimique de ce même carburant en énergie électrique à l'aide de piles à combustible » a déclaré Youri Chmotine, PDG de United Engine Corporation.

On the same subject

  • LES BRÈVES DE L'ACTUALITÉ | 27 Février 2023

    February 28, 2023

    LES BRÈVES DE L'ACTUALITÉ | 27 Février 2023

    Les brèves de l'actualités vous sont partagés par le Programme Accélérateur 360 - cliquer sur le document pour y avoir accès https://www.aeromontreal.ca/accelerateur360.html

  • Le Centech ouvre son appel à dépôt de projets!

    November 7, 2022

    Le Centech ouvre son appel à dépôt de projets!

    DU 07 NOVEMBRE 2022 JUSQU'AU 20 DÉCEMBRE 2022 POUR LA COHORTE HIVER 2023 Montréal, le 07 novembre 2022 – Le Centech, incubateur de startups issues des hautes technologies, ouvre la période des dépôts de projets pour le programme Accélération pour la Cohorte Hiver 2023 en format hybride à partir du lundi 07 novembre 2022 jusqu'au 20 décembre 2022. L'incubateur de calibre mondial accompagne les entreprises deeptech, medtech et edtech. Ce programme de 200 heures étendues sur 12 semaines est une opportunité pour les entrepreneurs à projets de haute technologie de valider le potentiel commercial de leur innovation technologique, de préciser le produit à mettre sur le marché, d'établir un modèle d'affaires et de présenter son projet à des investisseurs. Accélération est un programme gratuit et entièrement bilingue permettant de bénéficier d'un solide accompagnement par des experts reconnus dans un cadre stimulant. C'est aussi une opportunité de participer à de nombreux événements de réseautage et de parfaire ses connaissances dans le secteur de l'innovation. Cliquez sur le bouton ci-dessous pour vous inscrire ! Soumettre mon projet https://centech.co/aerospatial/le-centech-ouvre-son-appel-a-depot-de-projets-pour-la-cohorte-hiver-2023/

  • HebdoSTIQ - 05 novembre 2020

    November 6, 2020

    HebdoSTIQ - 05 novembre 2020

    Si vous avez de la difficulté à lire ce courriel, consultez la version en ligne. VOLUME 21, No 42 5 novembre 2020 Événements à venir Occasions d'affaires Actualités Tour de force pour la première édition virtuelle de la Journée Donneurs d'ordres/Fournisseurs La gestion de projets : Source de profits pour les PME Joignez-vous au prochain webinaire STIQ, présenté par Triode, le 12 novembre prochain à 12 h G.M. Précision : une entreprise en pleine expansion Découvrez la vidéo de présentation de G.M. Précision Une fonderie «verte» à Montréal-Nord : l'entreprise Vestshell Une entreprise de Montréal-Nord, qui s'est réinventée pour réduire son empreinte écologique, est devenue un modèle international en matière de développement durable dans son domaine ABB et Lion Électrique font équipe pour appuyer la mobilité électrique en Amérique du Nord Les deux entreprises ont fait équipe pour vendre de l'équipement de recharge de véhicules électriques (VÉ) et en faire l'entretien. Cette union favorisera l'essor de la mobilité électrique en Amérique du Nord Bienvenue aux nouveaux membres! STIQ est fière d'annoncer la récente adhésion de Lux Aeterna, MP Repro et Signalisation Ver-Mac à son réseau multisectoriel d'entreprises manufacturières Forum d'affaires Canada-Italie sur l'intelligence artificielle Joignez-vous à un forum virtuel d'envergure internationale sur l'intelligence artificielle du 18 au 20 novembre prochain, organisé par la Chambre de Commerce italienne au Canada Industrie 4.0 – La transformation des entreprises à l'ère de la quatrième révolution industrielle Participez à la 3e édition de cette formation, du 30 novembre au 9 décembre prochain, offerte en collaboration avec le Consortium de recherche en ingénierie des systèmes industriels 4.0 Session de coaching innovation en ligne Expansion PME offre des services d'accompagnement aux PME afin de les orienter et les outiller dans leurs démarches en exportation et en innovation Découvrez le programme de Creaform Connect ! Moitié salon et moitié conférence, cet événement virtuel gratuit est un incontournable pour les professionnels qui cherchent à relever leurs défis en développement et fabrication de produits! L'avenir d'une industrie minière post-Covid Découvrez cet article de Michel Corbin, président-directeur général, NeoSynergix Les bonnes nouvelles de l'industrie Bombardier Transport, AddÉnergie, Chantier Davie Canada, Rio Tinto, Nova Bus, Groupe Stelpro, Nouveau Monde Graphite, Hydro-Québec, Dana, Groupe Stelpro, Flextherm, Société de transports de Sherbrooke (STS) Occasions d'affaires Occasions d'affaires privées 2020CA017 – Recherche de fournisseur d'assemblage par la mesure laser Aérospatiale (manufacturier, entretien et services) 2020SC045 – Recherche une presse plieuse de 16 pouces / 220-260 tonnes. Produits métalliques Occasions d'affaires Appels d'offres publics 2020NR374 – Convoyeur mobile Machinerie 2020NR373 – Blocs et plaques de blindage en acier, pour application UCN d'accélération de particules Énergie (production et distribution) 2020NR372 – Camion fourgon aménagé pour service d'aqueduc Transport (fabrication de matériel de), sauf aérospatiale 2020NR371 – Camion fourgon atelier, pour service de travaux publics Transport (fabrication de matériel de), sauf aérospatiale 2020NR370 – Fourniture de contenants duo poubelle/recyclage pour parcs Environnement 2020NR369 – Entretien préventif, correctif ou d'urgence d'appareils de levage Machinerie 2020NR359 – Fourniture et installation de panneau électrique, pour sous-station d'usine de filtration Environnement 2020NR358 – Aménagement d'1 fourgonnette avec monte-charge et d'1 mini-fourgonnette Transport (fabrication de matériel de), sauf aérospatiale 2020NR357 – Entretien préventif, correctif ou d'urgence d'appareils de levage Énergie (production et distribution) 2020NR356 – Entretien correctif et préventif de vérins hydrauliques Énergie (production et distribution) Devenez membre Obtenez des avantages exclusifs Membres de STIQ Publiez Consultez les archives

All news