Le Conseil de l'innovation et l'Innovateur en chef du Québec

On the same subject

• 

  November 18, 2021

  Nouvelles du CRIAQ | Lancement 4e appel Innov-R, opportunités et activités de mobilisation

  Le 4e appel à projets multisectoriel Innov-R est lancé le 28 octobre 2021 afin de recueillir le plus grand nombre de projets de R-D collaborative. Le CRIAQ est prêt à recevoir votre demande pour votre projet aérospatial ayant un impact sur la réduction des émissions des gaz à effet de serre (GES) !

• 

  May 19, 2021

  StartAéro 360 | Les brèves de l'actualité 17 mai

  Industrie Aérospatiale Rolls-Royce (13 mai) Rolls-Royce has said that “large (commercial) engine” flying hours in January-April were 40% of their 2019 level. It attributes this to cargo flights and continuation of key international routes and says that it is “broadly unchanged from the end of 2020”. The company also said that its planned sale of ITP Aero is “progressing well... with an encouraging range of interested parties”. Airbus (12 mai) Airbus relance le projet de ligne d'assemblage final (FAL) A320/A321 modernisée et numérisée qui remplacera l'une des FAL A320 originales de Toulouse et sera installée dans l'ancien site A380. Il devrait être opérationnelle d'ici fin 2022. Hambourg et Mobile sont actuellement les seuls sites de production d'Airbus configurés pour assembler des A321. Le A321neo représente maintenant plus de la moitié du carnet de commande de la famille A320 (5,650 avions). CAE (12 mai) CAE has been selected by Jaunt Air Mobility to lead the design and development of the Jaunt Aircraft Systems Integration Lab (JASIL) for its all-electric vertical take-off and landing (eVTOL) aircraft. Certification planning is set to begin in 2023 with entry-in-service (EIS) expected in early 2027. The JASIL is designed to de-risk the aircraft program's schedule and manage development costs by identifying integration issues and proving failure modes early in the program. Airbus A320 family rate increases (11 mai) Airbus suppliers are saying that they are being asked to prepare for a possible further 18% increase in A320-family jet output by the end of 2022 to 53 per month. So far Airbus has only committed to raising the rate in two steps to 45 a month by the end of 2021, from 40 now. Boeing orders and deliveries (11 mai) During April, Boeing logged orders for 25 airliners and cancellations for 17. The orders included five 777 Freighters, and 20 737 MAX. The 17 cancellations were all for 737 MAX including three from Air Lease whose offsetting orders and cancellations were “re-contracts for earlier delivery positions”. Deliveries totalled 17 aircraft including nine 787s. Boeing aims to deliver the majority of roughly 100 completed but not delivered 787s by year-end. April deliveries also included one 767F, one KC-46, two 777Fs and four 737 MAX. Aircraft Electronics Association (11 mai) AEA has stated that worldwide business and general aviation avionics sales in the first quarter fell 13.9 percent year-over-year, to $568.8 million. While almost $100 million less than a year ago, AEA said this represented a marginal increase from the fourth quarter sales. North America market accounted for 76 percent of sales. Moody's (11 mai) Moody's has upgraded its outlook for the global airlines industry to "positive" from "negative", as the ratings agency expects steady vaccine rollouts across geographies to drive a rebound in commercial air travel. It expects the industry to sustain operating losses and negative operating margins in 2021, although to a lesser degree than in 2020. Safran Landing Systems (10 mai) Safran Landing Systems (SLS) a signé avec Bell Textron un accord portant sur les trains d'atterrissage du Valor V-280, un aéronef à rotors basculants de nouvelle génération proposé à l'armée américaine pour son programme d'hélicoptères de combat d'assaut de longue portée de demain (FLRAA). SLS développera et fabriquera un système d'atterrissage entièrement intégré. Les activités seront réalisées sur quatre sites de SLS en Amérique du Nord et en Europe. Le pilotage sera effectué depuis Ajax, ON, l'un de ses sites canadiens. GKN Aerospace (10 mai) GKN Aerospace has produced an intermediate compressor case (ICC) for Rolls-Royce that includes additive manufacturing. It was mainly manufactured using traditional casting techniques, but several of the attaching parts were fabricated using additive manufacturing. The production process also included a novel welding method. The ICC will be used in a demonstrator program for the UltraFan engine. It was developed as part of Clean Sky 2 which is part of the EU's Horizon 2020 program. Qarbon Aerospace (10 mai) Triumph Group has completed the divestment of three aerostructures composites manufacturing facilities in Red Oak, TX, Milledgeville, GA and Rayong, Thailand to Arlington Capital Partners which has renamed the businesses Qarbon Aerospace. The site in Red Oak produces large, complex composite and metallic structures. These operations employ 900 staff. MHI (10 mai) Mitsubishi Heavy Industries' aircraft, defence and space unit narrowed its full-year losses, but the SpaceJet programme will remain frozen in the near term. The unit reported an operating loss of Y94.8 billion for the year ended 31 March. The SpaceJet programme cut its full-year losses to Y116 billion, down from the previous year's Y263 billion. MHI will “continue type certification documentation activities and assess [a] possible programme restart” of the Spacejet during the fiscal year ending 31 March 2022. Airbus Canada (8 mai) Philippe Balducchi quitte ses fonctions de PDG d'Airbus Canada. Il a dirigé la transition du C Series de Bombardier à l'A220 d'Airbus. Il était avec l'entreprise depuis 2001 et avait veillé entre autres au démarrage de la FAL A220 de Mobile. C'est M. Benoît Schultz qui prendra la relève le 1er septembre 2021. Il avait été nommé Vice-président principal Approvisionnement, systèmes, équipements et services en 2016. Puis en 2018, sa responsabilité a été étendue pour inclure l'approvisionnement stratégique et commercial des systèmes de l'A220. Enjet Aero (3 mai) Kansas City-based aerospace company, Enjet Aero, announced today the acquisition of Birken Manufacturing. Birken Manufacturing, based in Hartford, Connecticut, is a high performing supplier of complex aeroengine components to Pratt & Whitney, GE Aviation, and Rolls Royce. Drones- Advanced Air Mobility ASSURED-UAM (10 mai) Companies and research laboratories from Poland, Italy, Portugal, and the Netherlands have teamed up to launch ASSURED – UAM to develop implementation, acceptance safety and sustainability recommendations for efficient deployment of Urban Air Mobility. The project has received funding from the European Union's Horizon 2020 programme. Japon -Ministère du transport (9 mai) Japan's transport ministry has begun discussions on safety standards and other key issues regarding commercial and private use of flying cars. It plans to establish standards for performance, safety, and a licensing system, by the end of 2023. It also intends to establish related infrastructure by 2023 and for initial operations in “safe areas” away from people. Jaunt Air Mobility (6 mai) Jaunt Air Mobility plans to open design and manufacturing operations in Canada and has appointed Eric Côté to head its Canadian operations. Martin Peryea, CEO of Jaunt Air Mobility, said "Canada and Québec offer a wide range of opportunities stemming from a long history in the aerospace industry, including an experienced workforce and global suppliers”. Spatial Arqit (12 mai) British quantum technology encryption startup Arqit is raising $400 million in the space industry's latest SPAC deal, supporting the launch and construction of two satellites in 2023 to protect against growing hacking threats. C6 Launch Services (10 mai) C6 Launch Services has signed an agreement with the government of Brazil to be a tenant at the Alc'ntara Space Centerl for future launches. The company previously announced that it had selected the UK based Shetland Space Centre as its primary launch site. It has also completed construction of an engine test stand at Spaceport America and begun tests. C6 Launch Services has taken important steps towards launching a new rocket designed for small payloads which may be Canada's first orbital rocket. C-Core (6 mai) The Canadian Space Agency (CSA) has awarded C-CORE a contract for the development of blockchain technology to be used with earth observation big data. The contract is an award from the CSA's procurement notice for seven priority technologies (PT) and covers PT 7, “Blockchaining on Service of Earth Observation Big Data”. The contract is valued at $500,000. Innovation Neste (12 mai) Neste has approved an expansion project at its Rotterdam refinery. Requiring an outlay of approximately $231 million, it will add 500,000 tons of sustainable aviation fuel (SAF) a year to the current 100,000 tons. This, combined with upgrades at its Singapore production facility, is expected to increase total annual output to 1.5 million tons by 2023. SAF accounted for just 0.01 percent of all fuel used by the aviation industry in 2019. Thales, Drones-Center et ZenT (12 mai) Thales, Drones-Center et ZenT annoncent avoir expérimenté en vol un drone équipé d'une pile à combustible hydrogène. « Les essais ont démontré la capacité à voler au moins deux heures avec un temps de rechargement en hydrogène ne dépassant pas une minute ». Les essais ont utilisé la solution ScaleFlyt Geocaging de Thales, développée avec le soutien de la DGAC. NASA (10 mai) NASA's all-electric X-57 Maxwell is undergoing high-voltage ground testing at NASA's Armstrong Flight Research Center in California. The principal goals of the X-57 Project are to share the design and airworthiness process with regulators and standards organizations and to establish the X-57 as a reference platform for integrated distributed electric propulsion technologies.

• 

  July 15, 2021

  Les brèves de l'actualité | 12 juillet 2021

  Industrie Aérospatiale Supplier opinions on Airbus and Boeing single aisle production rates Airbus (8 juillet) Durant les six premiers mois de l'année, Airbus a livré 297 avions à 67 clients soit 100 avions de plus qu'au premier semestre 2020. Cette hausse concerne surtout les moyen-courriers avec 258 livraisons contre 170 au premier semestre de 2020. Pour les gros porteurs, les livraisons sont de 39 appareils (2 A380, 30 A350, 7 A330) contre 26 au premier semestre 2019. Au 30 juin 2021, le carnet de commandes d'Airbus est de 6 295 avions. Bell/Transport Canada (7 juillet) Transport Canada has grounded Bell 204B, 205 and 212 helicopters. Investigation of a fatal crash in Alberta last month revealed detachment of main rotor hub strap pins. Affected pins must be replaced before further flight. This Airworthiness Directive affects 200 Canadian-registered helicopters. CAE (5 juillet) CAE has completed the acquisition of L3Harris Technologies' military simulation and training assets almost doubling CAE's domestic business in the US. The $1.05 billion transaction adds Link Simulation & Training, Doss Aviation and AMI to CAE USA's portfolio. Japan F-X engine (4 juillet) Japanese media has reported that Japan and the UK are in talks concerning joint development of the engine for the F-X fighter. The media claim that Rolls-Royce will partner with Japan's IHI Corporation and that they will also offer the engine for the export market. CFM international (2 juillet) CFM International détenue à parts égales par Safran Aircraft Engines et GE fournira un total de plus de 760 réacteurs LEAP-1B à United Airlines pour sa commande de Boeing 737 MAX (150 MAX 10 et 50 Max 8) ; son choix pour la motorisation de ses A321XLR n'a pas été annoncé. Latécoere (2 juillet) Latécoère a obtenu des prêts garantis par l'Etat de 130 millions d'euros et le rééchelonnement des anciens prêts et prévoit une augmentation de capital d'un montant minimum de 162,5 millions. Latécoère a vu son chiffre d'affaires baisser de 42 % en 2020 et prévoit pour 2021, une baisse de 25 % par rapport à 2020. L'acquisition de l'activité de c'blage de Bombardier, finalisée en février, limitera la baisse du chiffre d'affaires à environ 10 %. Eaton/ Cobham Mission Systems (28 juin) Eaton has acquired Cobham Mission Systems, a manufacturer of air-to-air refueling systems, environmental systems, and actuation, primarily for defense markets. It has 2,000 employees and manufacturing facilities in the United States and United Kingdom. Défense Boeing Defense UK (8 juillet) Boeing Defense UK has received a $322 million five-year contract to maintain and support the RAF fleet of nine Poseidon P-8A maritime patrol aircraft (MPA). Reports suggest that Boeing will select CAE for the training portion of the contract. Maritime Airborne Warfare System (MAWS) (8 juillet) French media are reporting that the purchase by Germany of five P-8A Poseidon aircraft to replace its P3-A Orion fleet could cause the French government to withdraw from its participation in the Franco-German Maritime Airborne Warfare System (MAWS) program and develop a France-only solution. F-35 forecast production (7 juillet) Cormorant Mid-Life Upgrade (6 juillet) DND has stated that “Extensive discussion and planning determined that upgrading the CH-149 fully to the Norwegian variant of the AW-101 was not a cost-effective solution to effectively meet the RCAF's needs. After a year of consultation, it was determined that Leonardo couldn't do the work at a cost that would respect the project's overall budget.” It has been reported that as a result the negotiations with Leonardo have been “paused”. UK Royal Navy (5 juillet) The British Royal Navy's new autonomy and lethality accelerator ‘NavyX' is testing UAVs that can be used to locate and rescue sailors. In one trial a UAV located a dummy in the water and deployed a test package. Participants in this effort included Malloy Aeronautics, Planck Aerosystem and the Defence Equipment and Support (DE&S). Raytheon Technologies (2 juillet) Raytheon Technologies will build three NGJ advanced electronic jammers to equip U.S. Navy EA-18G Growlers under a $171.6 million contract. In the future NGJ may also be fitted to the F-35, UAVs, and other manned aircraft. Drones- Advanced Air Mobility CAE /Volocopter(8 juillet) CAE and Volocopter are partnering to develop, certify, and deploy a pilot training program to support the launch of commercial eVTOL operations in 2024. CAE will invest up to $40 million to meet Volocopter's projected demand for eVTOL pilots in the early years of operations. Volocopter will purchase a simulator from CAE for its pilot training program certification. Volocopter (8 juillet) Volocopter is close to attaining EASA's Part 21G Production Organization Approval (POA) by the acquisition of German company DG Flugzeugbau. DG Flugzeugbau has supported Volocopter by helping to construct prototypes for its VC200, 2X, VoloDrone, and VoloCity aircraft. Thales (7 juillet) Thales a développé un drone capable de voler au-delà d'un rayon d'action de 100 kilomètres à basse altitude. La réglementation européenne (CS-LUAS) permettant désormais d'opérer de façon plus industrielle les drones et le lancement du marché est attendu en 2023. Thales prévoit le développement d'un drone de moins de 100 kg et ayant un rayon d'action de 300 km. Spatial UK Space 40% of all small satellites currently in orbit were manufactured in the UK  UK space accounts for 5.1% of the global space economy Planet (7 juillet) La société californienne Planet a annoncé son introduction prochaine à la Bourse de New York, après sa fusion avec le SPAC (société d'acquisition à vocation spécifique) dMY Technology Group IV. Planet, qui a lancé il y a dix ans la première constellation d'observation spatiale privée low-cost, est valorisée à 2,8 milliards de dollars. OneWeb (2 juillet) OneWeb has announced the successful launch of 36 more LEO satellites to cover regions north of 50 degrees Latitude including UK, Canada, Alaska and the Arctic region. OneWeb now has 254 satellites in orbit, 40% of its planned fleet of 648 satellites that will deliver high-speed, low-latency global connectivity. OneWeb intends to make global service available in 2022. Thales Alenia Space (2 juillet) Dans le cadre de la mission EnVision de l'Agence spatiale européenne (ESA) sur Vénus, Thales Alenia Space poursuivra la phase d'étude B1 de l'orbiteur. Cette nouvelle phase débutera en juillet 2021 pour une durée d'une trentaine de mois et permettra de consolider le design de la mission et du satellite, ainsi que de préparer la phase d'implémentation. Innovation Safran (7 juillet) Safran is working with customers to test sustainable aviation fuels with plans to deploy SAF blends this year and gain 100% SAF certifications for its engines by 2023. Deutsche Aircraft (7 juillet) Germany-based startup Deutsche Aircraft and hydrogen fuel cell developer H2FLY have signed an MoU to develop and test a hydrogen fuel cell commercial regional aircraft. The first test flight of the Dornier 328 aircraft is planned for 2025. H2FLY follows an R&D project called HY4 which was led by German research agency DLR, and involve the companies Hydrogenics, Pipistrel, H2FLY, the University of Ulm and Stuttgart Airport. GHGSat (7 juillet) GHGSat has announced a research project to assess the feasibility of using its space-based methane monitoring technology to measure emissions from offshore oil and gas platforms. Chevron, Shell, and TotalEnergies are supporting the 12-month project. Bell Textron (6 juillet) Bell Textron has announced plans for a Systems Integration Lab (SIL) facility at the Bell Flight Research Center (FRC) in Arlington, TX. It will support testing and verification for the Future Long-Range Assault Aircraft (FLRAA) and Future Attack Reconnaissance Aircraft (FARA). Britten Norman (5 juillet) Britten Norman is participating in two technology initiatives supported by the UK government. In “Project Fresson”, it is a member of a consortium led by Cranfield Aerospace Solutions to develop a hydrogen fuel cell powered passenger aircraft. Project HEART (Hydrogen Electric and Automated Regional Transportation) will demonstrate an autonomously-controlled and hydrogen-powered Islander aircraft on thinly-populated routes in the UK. Yamaha (4 juillet) Yamaha is entering the aviation engine market in a partnership with a Japanese manufacturer. It will modify one of its existing small engine designs for installation in a conventionally configured light aircraft prototype to be built by ShinMaywa Industries. Shell/Rolls-Royce (1 juillet) Shell and Rolls-Royce have signed an MoU to support the decarbonisation of the aviation industry. It will expand and accelerate several existing areas of cooperation between the companies. This includes Rolls-Royce's new SAFinity service, for which Shell is the exclusive SAF supplier, and demonstration of the use of 100% SAF as a full “drop-in” solution.